Why Are Force Typhoon 8 Filters Pink?

Share this article

Why Are Force Typhoon 8 Filters Pink?

 

 We get asked a plethora of questions on a daily basis pertaining to PPE here at Peke Safety, but as of late, the most commonly asked question has been “why is the Force 8 Typhoon pink?” (subsequently followed by “does it come in any other colors?”).
 
            The quick answer: no, the Force Typhoon 8 does not come in any other colors. There is in fact a calculated reason behind JSP Safety’s choice of bright pink (magenta) for the Force Typhoon 8 Press to Check filters; and no, it was not due to the fact that an engineer over at JSP Safety just liked the color pink. With this “what in the world” topic at the forefront of our minds, we thought we would take a moment to explain why the bright hue is simply not just a vanity decision while providing a bit of insight into NIOSH’s guide to respirators.
 
 
            To begin, there are three main filter categories within the PPE industry:
  1. Particulate Filters
  2. Gas and Vapor Cartridges
  3. Combination Cartridges/Filters
 
For this topic, we will be focusing on particulate filters. Particulate filters capture particles through the mechanisms of impaction, interception and diffusion. These filters are enhanced with electrostatically charged fibers to help trap particulates within the filter media.
NIOSH has nine classifications for particulate filters based on minimum filtration efficiency and the type of aerosol (non-oil or contains oil).
The chart below shows the nine classifications.

Minimum Efficiency

N: non-oil aerosols

R: includes oil aerosols*

P: includes oil aerosols**

95%

N95

R95

P95

99%

N99

R99

P99

99.97%

N100

R100

P100

*time use restriction is possible when oil aerosol is present
**follow manufacturer’s time use suggestions when oil aerosols are present

Each filter type mentioned above is assigned a specific color by NIOSH in order to be identified correctly for the appropriate application, as seen in the color coding for NIOSH chart here:
 
The type of particular filter found on the Force Typhoon 8 is a p100 filter that operates at a 99.97% efficiency also known as a High Efficiency Filter. As you can see from the chart, a High Efficiency Filter is given the color assignment Magenta (or pink as so many of us call it.)
 
While the color choice may not be the most low profile option to wear while you work, the Force Typhoon 8 does come with a magnitude of features making it the winner of the BSIF Product Innovation Award in Europe. These features include:
 
  • Press to check fit allowing you to instantly check for the perfect fit every time
  • No fit test required
  • Comfortable thermoplastic rubber mask for superior fit
  • Fully adjustable 4 point cradle suspension ensuring a proper facial fit
  • CR2 Reflectivity for increased visibility in a low light environment
  • Cost effect Force 8 filters with a low profile angle = maximum visibility
  • Typhoon Exhalation Valve for easy breathing
  • Passes dolomite
  • Protects against even the finest construction dust
 
So before you rule out the Force Typhoon 8 for its bright color choice, consider it the perfect affordable option for chimney sweeps, construction workers, first responders, daily pandemic protection, farmers (the list goes on).
 
In a PPE sea of blue, white, orange, and red : think pink.

 

Stay safe out there.

Share this article

Comments

Submit A Comment

You may also like

All Articles

4 min read

The Benefits of Changing Your Filters On Time

In the PPE industry, its been assumed that less than 30% of people replace their filters when they should, which can dramatically impact the effectiveness of your respirator, expose you...

4 min read

When To Change Your Filters In The Work Place

A lot of dust respirator also have active materials in their filters for trapping the contaminants. The active material present in the filter has a direct relationship with the service...

3 min read

Carbon Filters : Everything You Need To Know

Carbon filters are essential for protection from chemicals and odors. Let’s break down why carbon filters are used, how they work and if you should be using one with your application.

2 min read

why you should change your filters on your respirator

 Buying a respirator is only step 1 for protecting your respiratory, eye, and overall health for the rest of your life. Replacing your filters on a consistent basis Is step 2 and the most important step.

3 min read

Time To Change Your Filters

When using a respirator whether powered or disposable on the job, you will need to replace your filters consistently to not only ensure that you are being protected adequately from...