Powercap Active IP PAPR Bundle
Powercap Active IP PAPR Bundle

Powercap Active IP PAPR Bundle

JSP
$650
${ formatMoney(productPrice) } ${ computedProductOriginalPriceFormatted }
(${ formQuantity } @ ${ formatMoney(productOriginalPrice / formQuantity).replace('.00', '') })
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(sasoPriceWithQuantity * 100) }
(${ formQuantity } @ ${formatMoney(sasoPrice).replace('.00', '')})

Powercap Active IP PAPR Bundle

Part #: 30-400-15-I
$650
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(productPrice).replace('.00', '') }
(${ formQuantity } @ ${ formatMoney(productPrice / formQuantity).replace('.00', '') })
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(sasoPriceWithQuantity * 100) }
(${ formQuantity } @ ${formatMoney(sasoPrice).replace('.00', '')})
JSP
${ productVariantOptions[i] }: ${ optionSelections[i + 1] || 'Select ' + productVariantOptions[i] }

${ PdpError.description }

Please note: due to the high demand of this product, your order will take 7-10 business days to ship.

Description:

This bundle takes our Powercap Active IP and adds our most popular spares and accessories needed to keep you up and running at a reduced price. Suitable for facial hair and glasses.

Includes:

Powercap Active IP PAPR 

The PowerCap Active IP is a low-profile positive pressure respirator with built-in head impact-resistance intended to provide respiratory protection from particulate contaminants while alleviating the discomfort caused by traditional half masks. Includes

Pre - Filter Pads (Pack of 10)

The Powercap pre-filter pads help extend the life of the P2 filter cartridges by protecting the exposed pleats of the filters from large, visible clumps of floating particulate matter. This keeps the P2 filters running at maximum efficiency, allow for continued filtration of dangerous microscopic contaminants for extended periods and in the harshest of usage conditions.

Powercap Active P2 Filters (Pack of 2)

Replacement P2 filters for the Powercap Active replacement filters for the Powercap Active. Exceeds N95 particulate protection, meaning that the filter is 95% efficient against non-oil based particulates down to .3 microns in size.

Peel Off Visor Protectors (Pack of 10)

Peel-off visor protectors for the Powercap Active IP help keep the impact-resistant face shield scratch and dirt free, reducing the frequency of face shield replacement. Maintaining a clean, unobscured face shield helps reduce fatigue while working and greatly improve user safety.

Bundle Includes:

1 x Powercap Active IP, 1 x USB-Rechargeable 8-hr battery pack, 1 x Airflow indicator, 4 x P2 Filters, 1 x Pre-filter Pads (Pack of 10), 1 x Peel-off Visor Protectors (Pack of 10)

Conforms to EN 166, EN812+A1, EN12941+A2 TH1P. Respiratory protection to EN12941:1988 TH1P. Assigned Protection Factor 10 (UK classification) equivalent to an EN149 FFP2. Visor Protection: an impact protection of EN166 1B, ideal for working in environments where there is danger of flying particles.

Still have questions? contact us

Products that do not list an explicit NIOSH or ANSI approval on our website do not carry such an approval and should not be used in OSHA regulated environments without the expressed, written approval of a qualified safety manager or local representative of OSHA.

No respirator sold by Peke Safety is suitable for asbestos remediation.

Although the Powercap visor is impact-rated, ANSI-approved safety eyewear should be worn underneath the face shield at all times while the respirator is in use.

All respiratory and safety equipment, regardless of approval, should not be used without prior medical sign-off by a certified physician.

You might also like


Customer Reviews

Based on 68 reviews
91%
(62)
4%
(3)
1%
(1)
1%
(1)
1%
(1)
J
J B
Love it!! Everything I hoped it would be!

I thought long and often about whether to spend the nearly $700 for the PAPR bundle before I actually did. It was ultimately the logic of a fellow woodworker that convinced me to pull the trigger: This setup (or perhaps one like it) is much less expensive than a new set of lungs. Sold!

I learned a couple of tid-bits that I'll share with you:
1) You need to hold the power button in for 3+ seconds to activate it, and do it again to shut it off when the time comes. It wasn't written anywhere, and I thought at first I had a defective switch or motor.
2) The inside of the mask has a chemical / plasticy smell when new. It went away after letting sit in the open air overnight. And, the smell returned when I first donned the device and turned it on. No problem! Run the motor while NOT wearing the mask for 5-10 minutes (which is nothing for an 8 hour battery!), and smell is gone.
3) Examine the attachment of the velcro skirt where it meets the face mask before applying. I scratched the @#$% out of my sideburns areas when first applied from the exposed rough hook velcro that wasn't covered by the soft skirt. Once I ensured the skirt covered the hook it was soft and pleasant. That's it!

None of these items detracts from my commitment to wearing this beautiful machine, and I can't wait to use it for many hours more. If you're still reading this, you remain interested, so just buy it! Your lungs will thank you.
Stay well!

D
David Valeri
completely satisfied

The Powercap works great for yard work. It is way more comfortable then the half mask I have been wearing plus it protects my eyes. I have asthma and severe pollen allergies that affect my eyes, nose, and lungs. The Powercap really reduces my symptoms.

R
Robert Shaffer
Great product

It is a game changer. I never realized how much dust I was taking in when turning and sanding. It is light, comfortable and moves a continuing flow of cool filtered air. The rechargeable seems to last a long time. It is also easy on and off

M
Mark Firth
Powercap has increased my peace of mind in the wood shop

It is as advertised with cool flow of air that has been filtered. No fogging face shield. It is comfortable. I have worn it for a 3 hour stretch so far with several shorter times. No soreness or discomfort. The motor is not loud. No more nose dust devils or worry about fine dust particles going down my airways and into my lungs.

T
Timothy Mehling
Worth the wait

It took about five weeks to get my power cap, but it was worth the wait. All in one easy to use package. Very well built and fits great.