DTAPS C1 CBRN Coverall
DTAPS C1 CBRN Coverall

DTAPS C1 CBRN Coverall

Peke Safety
$716.97
${ formatMoney(productPrice) } ${ computedProductOriginalPriceFormatted }
(${ formQuantity } @ ${ formatMoney(productOriginalPrice / formQuantity).replace('.00', '') })
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(sasoPriceWithQuantity * 100) }
(${ formQuantity } @ ${formatMoney(sasoPrice).replace('.00', '')})

DTAPS C1 CBRN Coverall

Part #: 10-400-1
$716.97
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(productPrice).replace('.00', '') }
(${ formQuantity } @ ${ formatMoney(productPrice / formQuantity).replace('.00', '') })
${ computedProductOriginalPriceFormatted.replace('.00', '') }
${ formatMoney(sasoPriceWithQuantity * 100) }
(${ formQuantity } @ ${formatMoney(sasoPrice).replace('.00', '')})
Peke Safety

Call us at 1-800-277-1637 or send a message to place an order or discuss opportunities.

Description

NSN #: 8415-01-513-1576 (Neck Dam)

NSN #: 8415-01-513-1673 (Hooded)

The DTAPS C1 CBRN coverall was specifically developed under a government contract for use in dangerous CBRNe conditions and is fielded today by both the United States Navy and United States Air Force for medical readiness and response operations. It is constructed from ChemMax 4 material, which consists of a multi-layer composite chemical barrier laminated to a strong non-woven substrate and offers protection against chemical warfare agents as well as a broad range of toxic industrial chemicals.

Delivering enhanced strength, durability, flexibility, and comfort, the DTAPS C1 coverall is available with a custom neck dam that minimizes vapor intrusion into the coverall or with a respirator-fit hood with an elastic opening that fits tightly with a variety of CBRN tight-fitting face masks.

All respiratory and safety equipment, regardless of approval, should not be used without prior medical sign-off by a certified physician.

The DTAPS C1 is not flame resistant and should not be used around heat, flame, sparks, or in potentially flammable or explosive environments.

The DTAPS C1 should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.

Chemical resistance data is in accordance with ASTM F739 test methodology. Testing is performed on fabric samples only, not actual garments. Sample results vary and therefore averages for the results are reported. Sources for all test data are independent laboratory conditions and not actual use conditions.

Suit material is protective against bacteria, protozoans, rickettsia, toxins, and viruses. Bio-penetration resistance is measured in accordance with ASTM F1671.

Core benefits
  • Sealed seams maintain liquid-tight integrity in compliance with ASTM F1359 – Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray or Mannequin
  • Provides over 8 hours of protection against chemical warfare agents including Tabun (GA), Sarin (GB), Soman (GD), Mustard (HD), Lewisite (L), and V-agent (VX)
  • Protects against the 21 ASTM F1001 chemicals plus over 250 additional industrial chemicals

Product Specifications

DTAPS C1 Physical Testing Results

Physical Property Test Method Units Test Results
Basis Weight ASTM D3776 oz/yd2 6.5
Grab Tensile MD ASTM D5034 lbs 112
Grab Tensile XD ASTM D5034 lbs 90
Trapezoidal Tear MD ASTM D5733 lbs 52.2
Trapezoidal Tear XD ASTM D5733 Lbs 37.2

 

Permeation Data for 595 Class / Subclass Chemical Agents

Agent< Protocol Min. Detectible Penetration Breakthrough Time
GA (Tabun) C < .0001 > 480
GB (Sarin) C,D < .0001 > 480
GD (Soman) C < .0001 > 480
HD (Mustard) A,B < 1 > 480
L (Lewisite)

A

B

 < .06

< .042

> 480
VX (V-Agent) C, D < .0001 > 480

 

Permeation Data for ASTMF1001 List of Chemicals

Chemical Name Physical State CAS Number NBT (Min.)
Acetone L 67-64-1 > 480
Acetronitrile L 75-05-8 > 480
Ammonia G 7664-41-7 > 480
1,3 Butadilene G 106-99-0 > 480
Carbon Disulfide L 75-15-0 > 480
Chlorine G 7782-50-5 > 480
Dichloromethane L 75-09-2 > 480
Diethylamine L 109-89-7 > 480
Dimethyl Formanide L 68-12-2 > 480
Ethyl Acetate L 141-78-6 > 480
Ethylene Oxide G 75-21-8 > 480
n-Hexane L 110-54-3 > 480
Hydrogen Chloride G 7647-01-0 > 480
Methanol L 67-56-1 > 480
Methyl Chloride G 74-87-3 > 480
Nitrobenzene L 98-95-3 > 480
Sodium Hydroxide L 1310-73-2 > 480
Sulfuric Acid, 98% L 7664-93-9 > 480
Tetrachloroethylene L 127-18-4 > 480
Tetrahydrofuran L 109-99-9 > 480
Toulene L 108-88-3 > 480

 

Fabric Test Protocols

All tests conducted in triplicate by an independent accredited laboratory at 22EC, 50% R.H.

A - MIL-STD-282, Method T-209 for HD (or modified for L) for 12 hours at 10 g/m2 
B - MIL-STD-282, Method T-209 for HD (or modified for L) for 12 hours at 100 g/m2 (total coverage)
C - MIL-STD-282, Method T-208 for GB (or modified for GA, GD, & VX) for 12 hours at 10 g/m2
D - MIL-STD-282, Method T-208 for GB (or modified for GA, GD, & VX) for 12 hours at 100 g/m2 (total coverage)

You might also like


Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)